INSTRUCTIONS ON BIOS SETTINGS FOR THE LAVAPORT-PnP

Question:	
I am having trouble installing the LavaPort 650 PnP.  
What are the best BIOS settings for the card?

Answer:
The optimum settings in the BIOS for the LavaPort 650 PnP
are as follows:

If you are using the Win95 OS make sure that PnP OS is enabled.
 
If you are using NT or Windows 3.X then make sure it is disabled.
Make sure that your OnBoard serial Ports are NOT set to AUTO. 
Make sure that they are set to Strict addresses like 3f8 COM1
and 2f8 COM2.
 

IMPORTANT!! Before you make these BIOS settings changes for the
OnBoard Serial Ports make sure that you remove all the Serial Ports
from Device Manager (Win95) or from Control Panel Ports (NT). 
Then boot up in the OS WITHOUT the LavaPort installed. 
After the OS installs your OnBoard Serial Ports, shut down the
system again and install the LavaPort as specified in the manual
provided.