KNOWN ISSUES WITH LAVA PARALLEL PCI AND THE 278 ADDRESS RANGE

Sometimes when switching the Lava Parallel PCI to 0278 - 027F
it conflicts with some sound cards. If this occurs try using 
the 0288 - 028F address range.

If that does not work then it is necessary to reinstall the
OnBoard Parallel Port as the 3bc port and modify the Lava
PCI parallel port as the 0378 - 037F port.

Do this as follows:

a) Go to the Lava Parallel PCI in Device Manager. Go to Resources
and recheck Automatic Settings. Click OK and then click refresh.

b) Remove the Lava Parallel PCI from Device Manager and the LPT1.

c) Shut Down your computer and reboot.

d) As you are booting up enter your CMOS setup by hitting F1 or
DEL or the appropriate key for your motherboard.

e) Enter the menu for configuring your OnBoard parallel to 3bc
address.

f) save this new setting and exit.
NOTE: Consult your motherboard manual for steps d), e), and f).

g) Boot into Windows let the ports reinstall.

h) Reconfigure the Lava Parallel PCI to 0378-037F by going
to the Resources tab. Uncheck Use Automatic Settings and then
double-click Input/Output Range.