INSTALLING A PCI CARD IN WINDOWS XP
===================================

NOTE: The following instructions apply 
to PCI-bus serial 16550 UART ports 
and to PCI-bus parallel ports.

Lava PCI cards take drivers native to 
Windows XP as well as Lava drivers. 
When installing PCI cards, Windows XP 
asks for a driver disk. 
After searching the Lava Installation Diskette, 
Windows will also use drivers taken 
from the Windows XP Operating System.

When installing, a generic message may 
appear indicating a driver has not been 
submitted to Microsoft for approval. 
Continue with the install.

To change parallel port settings:
=================================
If you wish to change the LPT designation 
given to a port, go to the Device Manager, 
select the "Ports" menu, and select the port 
you want to change. Go to the "Properties" 
for that port, and select "Port settings." 
Use the drop-down menu to change the 
LPT number as needed.

To change serial port settings:
===============================
If you wish to change the COM designation 
given to a port, go to the Device Manager, 
select the "Ports" menu, and select the port 
you want to change. Go to the "Properties" 
for that port, and select "Port settings." 
Select "Advanced" and then use the 
drop-down menu to change the COM number as needed.