INSTRUCTIONS ON REINSTALLING CARDS IN WINDOWS 2000

Lava PCI cards do use a setup utility when installing in
Windows 2000. They install when New Hardware is found at the boot
up of Windows. Windows searches your hard and floppy drives for
an .inf file that includes the setup information for the card.
Sometimes, Windows' installation routine does not find
this file so it is necessary to reinstall the card.

The following procedure will reinstall the card:

1) Right Click on My Computer from the desktop and enter
Properties and then Device Manager. Enter the section called
Other Devices or Unknown Devices.

2) Remove the reference to either PCI card or PCI Serial
Controller or PCI parallel controller by right clicking 
on it and entering Uninstall.

3) Shut down your computer normally and ensure that 
the Lava card is seated properly in the PCI slot.

4) Reboot the system. Upon entering Windows, when the New Hardware
Found wizard appears, direct it to the root directory of the Lava
Installation diskette.

5) Windows will reinstall the card using the drivers from the
installation diskette.