QUESTION:
I have upgraded my system to Windows system to Windows Millenium Edition.  
I left my Lava Card in the system during the upgrade.  Now in Device Manager 
my card is showing up in Other Devices as PCI Parallel Card or PCI Serial card.  
Now the my peripheral attached to it (modem, printer, zip drive) won't work.  
What do I do now?

ANSWER:
	During the installation of the upgrade, Windows was looking for the 
drivers on the Windows ME upgrade CD.  Our drivers are not located on the 
CD so it couldn't install it properly.  The following procedure will have 
our card reinstall properly:

1) Go to Device Manager by Right Clicking on My Computer from the Desktop 
and entering Properties. Then click the Device Manager tab.
2) In Device Manager remove the PCI Parallel Card or PCI Serial Card with 
the exclamation (!) mark by clicking it and hitting delete on the keyboard.
3) Close all open Windows and reboot the system by using Start - Shutdown.
4) Upon the boot into Windows you will see the New Hardware found wizard.  
Direct this wizard to our diskette, following the procedure illustrated 
in the Lava Installation manual for installing the card in Windows 95/98.